Velocity

[mistit]

I spoke to matt at LRP solutions about a 220swift ackley improved , matt ordered a reamer and I sent the print off to whidden gunworks and had a full lenght bushing die made to suit the chamber .i did some load development today which consisted of very little other than shoot it through the chrony until I got the desired velocity then shoot it at 2-3 and 400 yds , velocity was 4600 with a 40 ballistic tip , fair dinkum .6 inch 5 shot group at 300 yds , 1 group don't tell me every thing other than dont waste my time burning the barrel out trying to prove any points , zero at 300 was 1.5 high at 200 3iches low at 400 . Now this is real world in the paddock with a lieca 1600 range finder not the ballistic chart in a book . To say I'm impressed is an under statement ,

heading out tonight to give some foxes a hurry up

[macca]

Don't it just sing.
Looks like it will be a beauty.
Good luck tonight.
Wind coming this weekend so make the most of it.
Cheers

[Camel]

Smokin'

[Space Cadet]

Awesome!

[Branxhunter]

I spoke to matt at LRP solutions about a 220swift ackley improved , matt ordered a reamer and I sent the print off to whidden gunworks and had a full lenght bushing die made to suit the chamber .i did some load development today which consisted of very little other than shoot it through the chrony until I got the desired velocity then shoot it at 2-3 and 400 yds , velocity was 4600 with a 40 ballistic tip , fair dinkum .6 inch 5 shot group at 300 yds , 1 group don't tell me every thing other than dont waste my time burning the barrel out trying to prove any points , zero at 300 was 1.5 high at 200 3iches low at 400 . Now this is real world in the paddock with a lieca 1600 range finder not the ballistic chart in a book . To say I'm impressed is an under statement ,

image.jpg

image.jpg

heading out tonight to give some foxes a hurry up

You single-handedly trying to turn back the .20 cal tide mistit?

As Camel said, that is smoking. Can't wait to hear how it goes on the furries.

Marcus

[trevort]

C'mon Marcus get real. If it was a 20 220 it would have been so much betterer . And there is a lab and ballistic calculator somewhere to prove it.

Very nice Mark

[Seddo]

Speed thrills!!

[Vermingone]

4600 is like warp speed.
Liable to make the world spin off kilter when you manage to stop it dead in something

[220]

You single-handedly trying to turn back the .20 cal tide mistit?

He's not alone, I still haven't found a reason to get a 20, 222 and swift do everything I need and with a bit more class
Have another 4000fps+ rifle on the way to join the swift but decided to go bigger not smaller.

[big G]

You single-handedly trying to turn back the .20 cal tide mistit?

He's not alone, I still haven't found a reason to get a 20, 222 and swift do everything I need and with a bit more class
Have another 4000fps+ rifle on the way to join the swift but decided to go bigger not smaller.

Well said Sean.
Big G

[crackers17]

that's quick and working very good too...

whats the rifle set you are using

[mistit]

Gday crackers the rifle is a barnard s single shot maddco 14 twist barrel jewel trigger mcmillan stock and a nightforce scope , I find it hard to beat for what I use it for

[mistit]

I should also mention I found that load a little warm so I've backed it off today to 4400 , still a stinging load and bugger all in it over 400 yds with same zero as the hotter load , at 4400 they won't give me any problems

[Teepee]

Obviously I hadn't read this post when I posted on your other post. ( hope that makes sense).

Great results!
Thanks for sharing.

[crackers17]

how do find the barnard to the other actions you have had or used
craig