These are a couple of pics looking for a load using 2206h in my cz527 kevlar varmint in 204 . First pic is four shots using 39 gr sbk , 1st shot on a cold barrel
Other pic was 10 shots using 2206h using 32 gr z max seated to magazine length , 1st shot was 27.6 gr going up in .2 grain increments till a max of 29.4 grain which was slightly over max on adi data , but appeared fine in my rifle .
Seems pretty temperamental ! Not !! Just fill the case , tip out the neck , seat a projectile and shoot the thing !
Cz527 varmint load development with 32gr z max
-
- 22-250 Remington
- Posts: 573
- Joined: Mon Apr 15, 2013 10:59 pm
- Favourite Cartridge: 22-250
- Location: Borden WA
Cz527 varmint load development with 32gr z max
- Attachments
-
- image.jpg
- Rotate photo 90 degrees , 28.8 gr was called as pulled
- (104.23 KiB) Downloaded 85 times
-
- 39 gr sbk
- image.jpg (104.6 KiB) Viewed 570 times
Re: Cz527 varmint load development with 32gr z max
pretty good group given every shot was different !
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Cz527 varmint load development with 32gr z max
Funny critters these 20 cals hey, my 20-222 will put three different projectiles in the same hole 32gn Vmax, Z-max and nosler BT. Ok yeah I know the Hornady bullets are the same, but its my story, Ok
-
- 22-250 Remington
- Posts: 573
- Joined: Mon Apr 15, 2013 10:59 pm
- Favourite Cartridge: 22-250
- Location: Borden WA
Re: Cz527 varmint load development with 32gr z max
That's what I reckoned , and a ten shot group . Everyone should have a 204 there just good funxa-coupe wrote:pretty good group given every shot was different !
Re: Cz527 varmint load development with 32gr z max
Had one, sold it to get the 17 ... now I am working out how to get another one
-
- 22-250 Remington
- Posts: 573
- Joined: Mon Apr 15, 2013 10:59 pm
- Favourite Cartridge: 22-250
- Location: Borden WA
Re: Cz527 varmint load development with 32gr z max
Couple on abusedguns the other day! Just go a new one , you know you want to
Re: Cz527 varmint load development with 32gr z max
Have to sell something else to get anything these days ... running out of toys that I can do without !!
On the upside, I have a recently retired Ruger 223 that I could rebarrel ...
On the upside, I have a recently retired Ruger 223 that I could rebarrel ...
-
- 22-250 Remington
- Posts: 573
- Joined: Mon Apr 15, 2013 10:59 pm
- Favourite Cartridge: 22-250
- Location: Borden WA
Re: Cz527 varmint load development with 32gr z max
Calibre/Item: 204
Make: Ruger
Model: 1B Stainless
Action: Falling Block
Scope/Sights: Rings only
Condition: Excellent
Price: $1950
Advertised: 21/03/2014
Comment: Ruger 204 Just re-barreled by TSE fired exactly 68 development rounds. Is accurate shooter has Kepplinger set trigger. ...
State: NSW
Calibre/Item: 204
Make: Howa
Model: 1500
Action: Bolt
Scope/Sights: Scope not included
Condition: Very Good
Price: $650
Advertised: 29/04/2014
Comment: Has only had 150 rounds put through. Buffalo Camo stock. Scope and mounts not included. Small rub marks on underside of...
State: QLD
There's two to start with
Make: Ruger
Model: 1B Stainless
Action: Falling Block
Scope/Sights: Rings only
Condition: Excellent
Price: $1950
Advertised: 21/03/2014
Comment: Ruger 204 Just re-barreled by TSE fired exactly 68 development rounds. Is accurate shooter has Kepplinger set trigger. ...
State: NSW
Calibre/Item: 204
Make: Howa
Model: 1500
Action: Bolt
Scope/Sights: Scope not included
Condition: Very Good
Price: $650
Advertised: 29/04/2014
Comment: Has only had 150 rounds put through. Buffalo Camo stock. Scope and mounts not included. Small rub marks on underside of...
State: QLD
There's two to start with
-
- .204 Ruger
- Posts: 454
- Joined: Thu Jul 25, 2013 6:48 pm
- Favourite Cartridge: 20-250
- Location: Ararat,Vic
Re: Cz527 varmint load development with 32gr z max
Still got one, but hardly use it since I got my 20 vt.
It does nearly everything I want in a 20 cal and if that's not enough I skip the 204 and go straight to the 20/250.
Gotta love those 20 cals.
It does nearly everything I want in a 20 cal and if that's not enough I skip the 204 and go straight to the 20/250.
Gotta love those 20 cals.
- Flip
- .243 Winchester
- Posts: 693
- Joined: Wed May 19, 2010 6:46 pm
- Favourite Cartridge: 20 VT
- Location: Adelaide
Re: Cz527 varmint load development with 32gr z max
Nice stuff.
I was told when I first got my 204 that some people were having trouble getting accuracy out of their hand loads that was even close to factory. It didn't to take me Long to find out that was BS!.
Mine shoots 32 V max real nice 40's are ok I think on the edge of stability maybe. Finally got to try some 39 SBK's they shoot great no hype there that's for sure. I also gave some 35 Bergers a try the other week end and they shot extremely well have not tried them on the furry critters yet. I've been using BR8208 and been happy with.
Can't wait to get the Vartarg built......... Might be a while but I will get there.
All the best and thank for sharing.
Flip
I was told when I first got my 204 that some people were having trouble getting accuracy out of their hand loads that was even close to factory. It didn't to take me Long to find out that was BS!.
Mine shoots 32 V max real nice 40's are ok I think on the edge of stability maybe. Finally got to try some 39 SBK's they shoot great no hype there that's for sure. I also gave some 35 Bergers a try the other week end and they shot extremely well have not tried them on the furry critters yet. I've been using BR8208 and been happy with.
Can't wait to get the Vartarg built......... Might be a while but I will get there.
All the best and thank for sharing.
Flip