Can anyone tell me is....
Posted: Fri Jan 10, 2014 7:38 pm
Adi Benchmark 8208 the same as imr8208 Xbr in the states?
AusVarmint
Can anyone tell me is....
Page 1 of 1
Re: Can anyone tell me is....
Posted: Fri Jan 10, 2014 7:42 pm
Same same
Re: Can anyone tell me is....
Posted: Fri Jan 10, 2014 8:17 pm
That's what I thought but I wanted to double check
The latest winter edition of varmint hunters has an article on the 20vt and he is using imr 8208 XBR. Up to 20 grs with the 32gr projectiles so my starting load of 17.5g was well below if that was the case. Might have to try a bit heavier load say around the 18.5- 19.5 gr range and see what sort of results I get.
Keep you posted.
The latest winter edition of varmint hunters has an article on the 20vt and he is using imr 8208 XBR. Up to 20 grs with the 32gr projectiles so my starting load of 17.5g was well below if that was the case. Might have to try a bit heavier load say around the 18.5- 19.5 gr range and see what sort of results I get.
Keep you posted.
Re: Can anyone tell me is....
Posted: Sat Jan 11, 2014 8:46 pm
Benchmark 8208 is a great powder,I now use it for .223 and .308 rifle and the results have blown me away 
......cheers
......cheersRe: Can anyone tell me is....
Posted: Sat Jan 11, 2014 11:29 pm
Tried it today(yesterday) but with 18.8gr it is still only showing approx 3200fps with the 32gr vmax. Group was the best I have shot with the 20vt so far so is worth while persevering with me thinks.
Will try 19 up to 20 grs now- seems that I will need to fill the case to get reasonable velocities with it in the 20vt. 20 grs of 2207 will go close to filling the case so would be a compressed load.
Will try 19 up to 20 grs now- seems that I will need to fill the case to get reasonable velocities with it in the 20vt. 20 grs of 2207 will go close to filling the case so would be a compressed load.
Re: Can anyone tell me is....
Posted: Sun Jan 12, 2014 7:42 am
Hey Elitesniper---- are you getting the same velocities using 8208 as you would with other powders? I know 8208 certainly helps accuracy wise.
Cheers Malcolm
Cheers Malcolm
Re: Can anyone tell me is....
Posted: Sun Jan 12, 2014 10:03 am
I have heaps of BM2 to use up but am going to give this stuff a try once I get down a bit on powder.
Re: Can anyone tell me is....
Posted: Sun Jan 12, 2014 1:27 pm
From my observations so far,
The 8208 seems to be "softer" than the 2207, not as harsh, doesn't have the same push or crack as the others I've tried. I have been using it in my 204 with great results as well.
Very easy to get into the small cases as well. If I can get it to work then I would much prefer to use this but so saying that I bought the 2207 to use in the VT so better use that first.
The 8208 seems to be "softer" than the 2207, not as harsh, doesn't have the same push or crack as the others I've tried. I have been using it in my 204 with great results as well.
Very easy to get into the small cases as well. If I can get it to work then I would much prefer to use this but so saying that I bought the 2207 to use in the VT so better use that first.
Re: Can anyone tell me is....
Posted: Sun Jan 12, 2014 6:30 pm
G'day Malcolmmalcolm wrote:Hey Elitesniper---- are you getting the same velocities using 8208 as you would with other powders? I know 8208 certainly helps accuracy wise.
Cheers Malcolm
I don't no what velocity I'm getting with the 8208 as I haven't bothered to chronograph my loads as of yet...what I do no is that for .223 my best loads are 24.7gr which is well below max and it thumps just as hard as if I was using either 2206h or 2208 powder,as for the .308 it doesn't fill the cartridge as much as the 2208.....cheers