Page 1 of 1
Horizontal
Posted: Sat Jan 15, 2011 2:05 pm
by MISSED
We had a play around with the rifles of our portable bench this morning.Anyway long story short I found the 22-250 was stringing for want of a better term the projies from left to right.If the aiming point was 9 0`clock the 5 shots went across to 2 o`clock :?Conditions were near on perfect at 6.30am. Has anyone got a simple answer for me
Re: Horizontal
Posted: Sat Jan 15, 2011 2:08 pm
by trevort
was the wind getting stronger?
Is there something in the forend touching the side of the barrel?
Could there be some movement in one of the mounts?
Is it clean? Found out that Kerriet's T3 goes to shit when dirty, went from tavkholer to shotgun and back to tackholer after a clean!
Re: Horizontal
Posted: Sat Jan 15, 2011 4:26 pm
by ratshot
How solid is that mobile bench , i used one and got the same thing and i realized i was leaning on the back of the bench to much and getting enough movement to give me a left to right string.
Re: Horizontal
Posted: Sun Jan 16, 2011 2:42 pm
by MISSED
ratshot wrote:How solid is that mobile bench , i used one and got the same thing and i realized i was leaning on the back of the bench to much and getting enough movement to give me a left to right string.
Food for thought Ratshot
trevort wrote:was the wind getting stronger?
Is there something in the forend touching the side of the barrel?
Could there be some movement in one of the mounts?
Is it clean? Found out that Kerriet's T3 goes to shit when dirty, went from tavkholer to shotgun and back to tackholer after a clean!
little or no wind
barrel channel clear
Rear windage screw slightly loose
Clean barrel
Boy am I a dickhead
Re: Horizontal
Posted: Mon Jan 17, 2011 11:16 am
by Knackers
Has anyone got a simple answer for me
Hangover?
Re: Horizontal
Posted: Mon Jan 17, 2011 1:11 pm
by MISSED
Re: Horizontal
Posted: Mon Jan 17, 2011 1:14 pm
by adamjp
MISSED wrote:Has anyone got a simple answer for me
MISSED wrote:ratshot wrote:Rear windage screw slightly loose
I'd say that more instruction on how to tighten a screw might be in order.
Re: Horizontal
Posted: Wed Apr 06, 2011 7:03 pm
by kurcha
the hangover ohh hangover it doesnt help shooting ,front bolt loose may be?