That is impressive. I'm over adi Max with my 6.5x55 with lapua brass, cci primer, 123gr a-max and 2209 and only get 2860fps out of my tikka. Having said that it works and I've never chased velocity, only accuracy.tripledeuce wrote:The max I've tried is 51g of 2213sc under a 140g AMax. Action is a Sako 75 so it should be able to handle he hotter loads. Accuracy is nothing to get excited about at around 0.8moa for the hotter loads. All the brass has been brand new so far, I need to see if I can fit any more powder in the fired cases, otherwise I will be giving 2209 a try.
Signs of pressure on primers
-
Hermtrails
- New Member
- Posts: 13
- Joined: Tue May 05, 2015 8:29 pm
- Favourite Cartridge: 223
- Location: Long plains sa
Re: Signs of pressure on primers
-
MISSED
- Moderator
- Posts: 8377
- Joined: Sat Dec 22, 2007 12:23 pm
- Favourite Cartridge: 20 PPC
- Location: YASS
Re: Signs of pressure on primers
Turkeyshooter wrote:Hi there tripple duce, given that you're using the excellent Lapua brass, your results look to me to be OK.
If you were to use that load with some other brass of lesser quality or unknown provenance, I would back it all off by at least 10%
That six and a half has been known to start grass fires!
hope this helps
John
Sound advice