Anyone used Gordon's Reloading Tool?

Discuss all aspects of Ammunition and Reloading here.
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Anyone used Gordon's Reloading Tool?

Post by The Raven »

daisy wrote: Fri Oct 16, 2020 9:19 pm Don't forget to crimp or the projectile might push out.
Probably best to braze them in. :evil:
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Anyone used Gordon's Reloading Tool?

Post by trevort »

Well that proved useful


Sent from my iPhone using Tapatalk
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Anyone used Gordon's Reloading Tool?

Post by dashooter »

trevort wrote:Well that proved useful


Sent from my iPhone using Tapatalk
I’ll put it through quickdak and let you know.


Sent from my iPhone using Tapatalk
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Anyone used Gordon's Reloading Tool?

Post by trevort »

Adi doesn’t list it but the inter webs say start with 280 rem starting loads


Sent from my iPhone using Tapatalk
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Anyone used Gordon's Reloading Tool?

Post by dashooter »

trevort wrote:Adi doesn’t list it but the inter webs say start with 280 rem starting loads


Sent from my iPhone using Tapatalk
What’s ya barrel length?


Sent from my iPhone using Tapatalk
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Anyone used Gordon's Reloading Tool?

Post by dashooter »

trevort wrote:Adi doesn’t list it but the inter webs say start with 280 rem starting loads


Sent from my iPhone using Tapatalk
I wouldn’t go more than 57.0 grains of 2209 (close to max pressure).
Depending on barrel length you should get between 2890 and 2950 fps.


Sent from my iPhone using Tapatalk
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Anyone used Gordon's Reloading Tool?

Post by trevort »

Well adi says 49.5 is the max for the 280 rem for 2610 and the 7x64 should be a grain or two lower.

Are you sure you put the right powder and case in?

Standard T3 sporter barrel


Sent from my iPhone using Tapatalk
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Anyone used Gordon's Reloading Tool?

Post by dashooter »

trevort wrote:Well adi says 49.5 is the max for the 280 rem for 2610 and the 7x64 should be a grain or two lower.

Are you sure you put the right powder and case in?

Standard T3 sporter barrel


Sent from my iPhone using Tapatalk
There’s 1.1 grain less powder capacity in the .280 than the 7x64 according to quickdak.
Is ADI load data for actions that aren’t as strong?
The ADI data sounds quite anemic for the .280 Rem. That load you mentioned is only at 39575 psi for a case that is rated to 58740 psi. Speed is estimated at 2581 fps with a 26 inch tube.
I’m assuming your 7x64 is a 22 inch tube.



Sent from my iPhone using Tapatalk
Post Reply