Creedmoor wildcats...

[Glenn]

Con 22x47 lapua


Sent from my iPhone using Tapatalk

Exactly!

Glenn

[trevort]

I made mine for light pills but Kickin's is for heavy and he has a few 75gn amax. Interested to see how they go

[Con]

Con 22x47 lapua

I hear ya ... but jeez I want to avoid extensive brass forming as much as possible. At least I can get 6mm Creedmoor brass.
Cheers...
Con

[kickinback]

Con 22x47 lapua

I hear ya ... but jeez I want to avoid extensive brass forming as much as possible. At least I can get 6mm Creedmoor brass.
Cheers...
Con

Yep. I had to make a die.


Sent from my iPhone using Tapatalk Pro

[Con]

Con 22x47 lapua

I hear ya ... but jeez I want to avoid extensive brass forming as much as possible. At least I can get 6mm Creedmoor brass.
Cheers...
Con

Yep. I had to make a die.


Sent from my iPhone using Tapatalk Pro

What speeds you getting from 75gr-80gr? Just about to drop the hammer on a 22 Creedmoor reamer.

Cheers...
Con

[kickinback]

I’m loading some tonight for load dev. I’ll let you know.

P.S. I’m not going to stop tipping more powder in until case head expansion dictates enough.

Or I run out of room in the case.


Sent from my iPhone using Tapatalk Pro

[trevort]

FYI Con there was more room in the case when the 55 vmax hit 4000fps


Sent from my iPhone using Tapatalk

[Glenn]

I’m loading some tonight for load dev. I’ll let you know.

P.S. I’m not going to stop tipping more powder in until case head expansion dictates enough.

Or I run out of room in the case.


Sent from my iPhone using Tapatalk Pro

That is exactly how it should be done!

With that case you run out of powder room before it expands!

I actually got pressure, firmish bolt lift, in my 6x47Lap with Reloaded 15, but
I did get 3850fps with a 67 Copperhead!

I am interested to see how the 22x47Lap goes with 75's.

Glenn

[Seddo]

I ordered a 7 twist 22cal barrel as soon as i saw the new Sierra 95gr smk's with a G1 of 0.600, i had to have a crack.

The decision to be made now is 22 Creedmoor or 22-250AI. Luke has a 22 Creedmoor reamer and Aaron has one in on the way so that isnt an issue. I think the Creedmoor will feed better but ill have a crack and necking a few 6mm CM hornady and 6.CM lapau cases down before i make the decision.

If you google there are guys posting simular velocities between the 22-250Ai and 22 CM but then ther i sno fun in agreeing with them.

[trevort]

I ordered a 7 twist 22cal barrel as soon as i saw the new Sierra 95gr smk's with a G1 of 0.600, i had to have a crack.

If you google there are guys posting simular velocities between the 22-250Ai and 22 CM but then ther i sno fun in agreeing with them.

love your attitude!

Con I was able to from from 6.5 to 6 and then 6 to 22 with bushings

[Con]

Luke has a 22 Creedmoor reamer and Aaron has one in on the way so that isnt an issue.

Whose Luke? Drop me a PM, may save me having to buy a reamer.
Cheers...
Con

[Seddo]

Luke has a 22 Creedmoor reamer and Aaron has one in on the way so that isnt an issue.

Whose Luke? Drop me a PM, may save me having to buy a reamer.
Cheers...
Con

ProCal http://procaltrading.com/ He built Trev's as well.

[Seddo]

love your attitude!

I did the same with the 150gr 6.5's, i'm waiting on Lilja to get a button to do 7 twist.