.Okay firstly many thanks to all that gave me advice as it was much appreciated
.An extra special thanks goes to two other blokes from this forum & the Redmist forum(Redmist forum)
http://www.redmistshooting.com.au/
JP mate you must of spent a fare bit of time on those spread sheets you PM'ed me,"what goes on in the mind of a reloader".
Long but bloody informative/valuable info,many thanks
.Also gave up a lunch break to answer any other questions I had.
MATE YOU ARE A DEAD SET CHAMPION,ROCK-ON
.Roo,Sav,Darf Wby,460wby bunny shooter or Mark as we all know him filled my head(Brain washed me
) with nothing but the most important TRIED Weatherby reloading methods going around. IT"S A MARK V,SO RUN THOSE BASTARDS HOT HOT HOT,
.This bloke took the time to go through the whole reloading process(I mean everything) over the phone.And by-geezus it made the whole thing allot of fun & never a stress.
F#ck me in minutes I was spitting these things out.
Could it be that easy
,well Roo made it that easy 
.MATE YOU ARE A DEAD SET LEGEND,ROCK-ON
.Okay now for the fun bit,letting these suckers fly
.Powder = AR2213SC
Primers = Federal GM215M
Brass = Norma
Projectiles = 225gn Barnes TSX(Triple shocks)
AOL on all = 3.62"-3.63"
Reloading Manual Min=82gn,Max=86gn.
100M Sight-in.
I was playing it safe at first so I started right in the middle(84gn).
84
84.5
85
85.5
86
Not one sign of any overload on any load
.100M
100M
100M(Final sight-in)
As you can see it luv's the hot stuff
.End result 86gn is the winner,that is until I go hotter
.
