22-250 Loads?

[walking_death]

bumping an old post, but...

My 22-250 loads are,

55gn Nosler Ballistic tip over 39gn of W760 or
50gn Nosler Ballistic tip over 37gn of W748 or
40gn Nosler Ballistic tip over 40gn of W748 (4260fps, who needs a 17rem?) caution VERY hot load
CCI large rifle primers in all of them.

works for me.

[dave]

Found a new one over the weekend that is equal to or better than the others ive listed,

50gr Blitzking, PMC Brass, Rem Magnum Prim, 37.5gr ar2208 (max load)
Didnt have chrony at the time but i suspect its pushing 4000fps

[kjd]

Found a new one over the weekend that is equal to or better than the others ive listed,

50gr Blitzking, PMC Brass, Rem Magnum Prim, 37.5gr ar2208 (max load)
Didnt have chrony at the time but i suspect its pushing 4000fps

Mate how flat are your primers? I'd love to see a fired case after that load

[dave]

Must admit, didnt have a real good look at them at the time, no problems with bolt lift etc....hmmm i will take some pics and get ur opinion i honestly cant remember looking at them, thats what happens when ur in a rush!

[lowndsie]

Wait till i get my 460 bunny buster!!!

Doesnt matter if you miss them cause the muzzle blast bowls them arse over

[300RUM]

mate, 35gr of 2208 and any 55gr pill and you will probably find it will touch holes at a hundred. on a lighter note ive worked up a bunny load for the 378wby 118g ar 2225 with 300gr sp hopefully with that ill still be able to take some nice skins

If you're not worried about the skins you should try the 220 gr hornady (or Taipan) in the 378. You should get 3400+fps out of that gun easy. And if you run it through a ballistics programme you'll notice it shoots alot flatter than a 223 too! BC. of .217 and 5600 foot pounds of muzzle energy................ NICE Trust me it removes the finger prints!
Cheers

[walking_death]

NICE Trust me it removes the finger prints!
Cheers

Don't you mean paw prints?

[300RUM]

Don't you mean paw prints?

Trust me................... I know what I meant