.500 S&W

Discuss all aspects of Ammunition and Reloading here.
Post Reply
User avatar
Marco
.204 Ruger
Posts: 515
Joined: Sat May 09, 2009 11:01 pm
Favourite Cartridge: 7.62x39
Location: NSW

.500 S&W

Post by Marco »

hi guys

just wondering, is it still possible to buy .500s&w ammo here in nsw?

& while im here, who chambers it in a lever action ( mass produced, not custom made!)

for a pistol cartridge its looking good cause it will kill anything walking here in oz
that and the fact that you can load 700gr cast bullet, that 50gr heavier than the .50bmg
650gr ball rnd.
the down side is range .... 200m in the pistol however, in a rifle i dont know?
adamjp
.270 Winchester
Posts: 1293
Joined: Fri Mar 20, 2009 4:01 pm
Favourite Cartridge: 30/06
Location: Sthn NSW

Re: .500 S&W

Post by adamjp »

Marco wrote:hi guys
just wondering, is it still possible to buy .500s&w ammo here in nsw?
Sort of. Special order only.
Marco wrote: & while im here, who chambers it in a lever action ( mass produced, not custom made!)
No. I'd consider one if they did though.

Slightly scaled up (and beefed up) Win92 clone would be fantastic.
dangaff
.204 Ruger
Posts: 493
Joined: Mon Apr 13, 2009 11:02 pm
Favourite Cartridge: .204
Location: Research,Victoria
Contact:

Re: .500 S&W

Post by dangaff »

PM me mate - I can get it in a few different brands
User avatar
fenring
Moderator
Posts: 2607
Joined: Sun Jan 07, 2007 2:50 pm
Location: Central Victoria, Australia

Re: .500 S&W

Post by fenring »

It's a custom only job Marco. Nobody chambers it in a factory rifle. It's been mooted in various circles though.

A shortened Remington 7600 pump in .500 would be awesome - if the ammo was readily available.

I'm sure the Govt. would love it too - "Rapid fire .50 calibre rifle." :lol:
spinna
.22 WMR
Posts: 126
Joined: Wed Aug 09, 2006 7:17 pm
Location: Darwin

Re: .500 S&W

Post by spinna »

Yes NIOA can't even get the H&R Handi single shot break action in 500 S&W from USA...cause its a 50 cal..

Guide mate up here has 2 revolvers that I load for, an 8" scoped one and a 4" brute with ported barrel.

40 gr of 2205 with 325 gr Speer and 35 gr of 2205 with 400gr Woodleigh are potent loads that he has wasted quite a few pigs, scrub cattle and buffs with

spinna
User avatar
Marco
.204 Ruger
Posts: 515
Joined: Sat May 09, 2009 11:01 pm
Favourite Cartridge: 7.62x39
Location: NSW

Re: .500 S&W

Post by Marco »

spinna wrote:Yes NIOA can't even get the H&R Handi single shot break action in 500 S&W from USA...cause its a 50 cal..
spinna
what a shit, oh'well we will have to wait till barrak obama gets kicked out
User avatar
Marco
.204 Ruger
Posts: 515
Joined: Sat May 09, 2009 11:01 pm
Favourite Cartridge: 7.62x39
Location: NSW

Re: .500 S&W

Post by Marco »

last night i ask a mate in the states this same question and he told me that his son has one of these....

http://www.bighornarmory.com/products/carbine.php

xlMb62rIfqc&feature=related
adamjp
.270 Winchester
Posts: 1293
Joined: Fri Mar 20, 2009 4:01 pm
Favourite Cartridge: 30/06
Location: Sthn NSW

Re: .500 S&W

Post by adamjp »

Marco wrote:last night i ask a mate in the states this same question and he told me that his son has one of these....

http://www.bighornarmory.com/products/carbine.php
Yep, know about them. Did your friend also tell you that supply is patchy to non-existant and they cannot be exported?

BigHorn is the second or third mob to push that rifle and for some reason they keep going broke.

What would be good is a company like Rossi to step up with one from them. Their manufacturing might and general competence would make that rifle a reality.
User avatar
fenring
Moderator
Posts: 2607
Joined: Sun Jan 07, 2007 2:50 pm
Location: Central Victoria, Australia

Re: .500 S&W

Post by fenring »

RDavies
.257 Roberts
Posts: 785
Joined: Sun May 25, 2008 9:43 pm
Favourite Cartridge: 7 SAUM
Location: Singleton, Hunter Valley, NSW

Re: .500 S&W

Post by RDavies »

Are the bullets .505 or .510"? If you did screw on an Oz made 50 cal barrel, it could rightly be called a .505 or 510S&W. Then it wont be one of the dangerous 50 cals.
adamjp
.270 Winchester
Posts: 1293
Joined: Fri Mar 20, 2009 4:01 pm
Favourite Cartridge: 30/06
Location: Sthn NSW

Re: .500 S&W

Post by adamjp »

The problem with this cartridge is finding an action wide enough to take it. It is a fat cartridge. That is why the Bighorn action is a 89/92 hybrid.
philw

Re: .500 S&W

Post by philw »


Fen the PT 500 rocks, would be a cracker of a pig gun, if I had the funds I would get one in from the states
spinna
.22 WMR
Posts: 126
Joined: Wed Aug 09, 2006 7:17 pm
Location: Darwin

Re: .500 S&W

Post by spinna »

Projectile are .500 dia for the 500 S&W,
No Aussie barrel makers do this size, only .510
Been toying with getting one made up on a Ruger no 1 action, but can't get a .500 barrel here, and they can't be imported from USA

spinna
User avatar
fenring
Moderator
Posts: 2607
Joined: Sun Jan 07, 2007 2:50 pm
Location: Central Victoria, Australia

Re: .500 S&W

Post by fenring »

Lee make a mould for the bullet. A 440gr flat nose, gas check I think it is. Would empty the lead pot fast.... :lol:
Post Reply