AusVarmint

G'day all I have been off shooting for quite a while walk into the local today to get some Rimfire ammo and seen these hanging on the wall . so now I have a project be interesting to see what it is like once put together

Interested in what you build. I’ve read they are a good thing for the price


Sent from my iPhone using Tapatalk

trevort wrote: ↑Wed Aug 05, 2020 10:17 pm Interested in what you build. I’ve read they are a good thing for the price


Sent from my iPhone using Tapatalk

G'day Trev I hope all is well your way at the moment , the rifle that is going in the chassis is my son's Howa 223 the chassis alone seems comfortable to shoulder I am seriously thinking of getting one from Cleavers seems pretty good value for $550 but I would have to sell my B&C m40 stock 1st ......

Cheers TAC

I just bought one

For those that are wondering what they look like .......
I would like one for my la101

We should have done some research first I won't be getting one for my Remington that's for sure ......

What’s wrong with it ?


Sent from my iPhone using Tapatalk

You have to shorten the bolt stop by 3 or 4 mm so the bolt will pick up a cartridge out of the mag small problem I know .

it won't affect a medium sized case and the barrel does not sit centre in the barrel channel major machining required to fix that one.

and I'm not the only one there are others on forums complaining of exactly the same problem .

Cheers TAC

Barrel not straight in the barrel channel would shit me to tears


Sent from my iPhone using Tapatalk

trevort wrote: ↑Sun Aug 09, 2020 4:48 pm Barrel not straight in the barrel channel would shit me to tears


Sent from my iPhone using Tapatalk

Yep I agree doesn't affect the shooting at all because the bedding still good but it just pisses me write off

Mine turned up today and the barrel in centered in the channel. I'm thinking i might have to buy another chassis and attack it with the chop saw and tig welder..... might be another project coming.

Seddo wrote:Mine turned up today and the barrel in centered in the channel. I'm thinking i might have to buy another chassis and attack it with the chop saw and tig welder..... might be another project coming.

I bet you were pleased when you saw it was centred properly

A customised chassis.


Sent from my iPhone using Tapatalk

Seddo wrote: ↑Tue Aug 11, 2020 10:03 am Mine turned up today and the barrel in centered in the channel. I'm thinking i might have to buy another chassis and attack it with the chop saw and tig welder..... might be another project coming.

Seddo was it for a howa or a rem foot print.

Tackleberry wrote: ↑Tue Aug 11, 2020 1:03 pm

Seddo wrote: ↑Tue Aug 11, 2020 10:03 am Mine turned up today and the barrel in centered in the channel. I'm thinking i might have to buy another chassis and attack it with the chop saw and tig welder..... might be another project coming.

Seddo was it for a howa or a rem foot print.

Howa Mini Action