Page 1 of 2

Magnetospeed

Posted: Thu Jul 27, 2017 7:48 am
by trevort
There is a $325 model and a $600plus model. Any practical difference in accuracy or reliability?


Sent from my iPhone using Tapatalk

Re: Magnetospeed

Posted: Thu Jul 27, 2017 7:50 am
by dashooter
Zero difference on those two points. One has a hard case the other a cardboard box. There's a couple of other differences as well that I can't think of right now.

Re: Magnetospeed

Posted: Thu Jul 27, 2017 12:05 pm
by trevort
So no reason to spend an extra 300 then


Sent from my iPhone using Tapatalk

Re: Magnetospeed

Posted: Thu Jul 27, 2017 12:39 pm
by dashooter
trevort wrote: Thu Jul 27, 2017 12:05 pm So no reason to spend an extra 300 then


Sent from my iPhone using Tapatalk
I wouldn't.

Re: Magnetospeed

Posted: Thu Jul 27, 2017 2:44 pm
by macca
Barrel size ?
One doesn't do target type barrels me thinks. Could be wrong.
Cheers

Re: Magnetospeed

Posted: Thu Jul 27, 2017 3:38 pm
by dashooter
macca wrote: Thu Jul 27, 2017 2:44 pm Barrel size ?
One doesn't do target type barrels me thinks. Could be wrong.
Cheers
Sporter wont fit suppressors, the more expensive one does.

Re: Magnetospeed

Posted: Thu Jul 27, 2017 4:01 pm
by trevort
Bit is will fit target size bull barrels?

or could it be attached to them with zip ties?

Re: Magnetospeed

Posted: Thu Jul 27, 2017 4:34 pm
by dashooter
trevort wrote: Thu Jul 27, 2017 4:01 pm Bit is will fit target size bull barrels?

or could it be attached to them with zip ties?
My V1 fits the bull barrel on my 240 Wby. It would have to be around 25mm diameter (can measure tonight if you like).

Re: Magnetospeed

Posted: Thu Jul 27, 2017 4:49 pm
by macca
The sporter does to 25mm the v3 up to 50mm. So the sporter will not fit my target barrels except a couple of the long f open ones.
Cheers

Re: Magnetospeed

Posted: Thu Jul 27, 2017 5:17 pm
by trevort
so can you simply tie the sporter onto target barrels with cable ties?

Re: Magnetospeed

Posted: Thu Jul 27, 2017 5:40 pm
by aam
The more expensive one has a SD card which stores all the info, which you can put in the computer.

Works out your MV, Min, Max, Avg, and SD.

With the least expensive model I believe you have to write down the MV as there is no SD card in there.

Re: Magnetospeed

Posted: Fri Jul 28, 2017 5:59 pm
by mick_762
Trev, do you want to borrow my V2 to see what they are like?

Re: Magnetospeed

Posted: Fri Jul 28, 2017 6:00 pm
by dashooter
mick_762 wrote: Fri Jul 28, 2017 5:59 pm Trev, do you want to borrow my V2 to see what they are like?
Make sure you get a deposit. :stir:

Re: Magnetospeed

Posted: Fri Jul 28, 2017 6:51 pm
by mick_762
dashooter wrote: Fri Jul 28, 2017 6:00 pm
mick_762 wrote: Fri Jul 28, 2017 5:59 pm Trev, do you want to borrow my V2 to see what they are like?
Make sure you get a deposit. :stir:

Awww come on, not even Trevor could fuck it up

Yeah your right. . . .

Re: Magnetospeed

Posted: Sat Jul 29, 2017 1:11 am
by trevort
Crunts


Sent from my iPhone using Tapatalk