Scope level device

Scopes, Range finders, Binoculars, Bipods etc etc. Discuss them all here!
WhiteMeat
.17 HMR
Posts: 240
Joined: Mon Nov 13, 2006 11:44 am
Favourite Cartridge: 223AI
Location: Blue Mountains, NSW

Re: Scope level device

Post by WhiteMeat »

Another stick on the fire (so to speak) is that if you have a scope that has a flat base on the bottom of the turret housing and you have a flat scope rail (ie - weaver / picatinny / cz / etc)

Put a set of feeler gauges in between the scope and the rifle to fill in the gap, enough so that the scope contacts the gauges and the rail, but not enough to cause the scope to rise up out of the rings. Tighten down the tops after this to required torque (or the she'll be right tightness)

With this method, you level the scope to the scope rail of the rifle via the feeler gauges and then all you need to do is tighten down the rings and then get it onto paper.

The USO bubble level listed above is more used to detect cant in the rifle when shooting at distance.
r_j_t1982
.22 WMR
Posts: 105
Joined: Thu Feb 07, 2008 9:42 pm
Favourite Cartridge: .204r
Location: GEELONG, VIC

Re: Scope level device

Post by r_j_t1982 »

the VRA shop sell a number of different anti cant devices, check out : http://www.vra.asn.au/shop/scopes.shtml

only $55 too, though from memory these are the ring type, not the foldout like you pictured.
Poohbah
New Member
Posts: 16
Joined: Tue Feb 26, 2008 10:15 pm
Favourite Cartridge: 223rem
Location: Gladstone

Re: Scope level device

Post by Poohbah »

I have a scope mounted level but I think a rail mount would be easier to see while shooting. This is quite a hard item to find, Procal has a Bsquare rail mount level but it doesn't fold away and would be a pain getting caught on things.
Thanks for the replys so far.
User avatar
Curtley78
Political Advisor/Activist
Posts: 1170
Joined: Tue Mar 25, 2008 8:17 am
Favourite Cartridge: 7mm08 AI
Location: Helensburgh 'Dixie'

Re: Scope level device

Post by Curtley78 »

I forgot to mention that the reason for setting the rifle level before fixing the scope is that you may find that the barrel and action do not sit square in the bedding compound.
User avatar
HiWall
Site Admin
Posts: 854
Joined: Sat Dec 09, 2006 1:51 am
Favourite Cartridge: .25/06
Location: Brisbane

Re: Scope level device

Post by HiWall »

I have one of the US Optics levels on my Savage F Class rifle mate - was going to post a pic of a nice stock scratch right next to the folding level but camera batteries are flat. The advantage of the folding type would then be obvious, well worth the few extra bucks.

Not sure if US Optics will ship overseas, but they do sell via their website.

Contact eMail on this link -
http://www.usoptics.com/index.php?page=contactUSO

And the Cant level on this -
http://www.usoptics.com/acc.php?typeID= ... 0Indicator
User avatar
flmath
New Member
Posts: 96
Joined: Fri Feb 13, 2009 6:43 pm
Favourite Cartridge: 22 hornet
Location: Bayside, Brisbane Australia

Re: Scope level device

Post by flmath »

This is an Aussie made device on ebay

http://cgi.ebay.com.au/GREAT-IDEA-AMAZI ... otohosting
Poohbah
New Member
Posts: 16
Joined: Tue Feb 26, 2008 10:15 pm
Favourite Cartridge: 223rem
Location: Gladstone

Re: Scope level device

Post by Poohbah »

Found, thanks to Pongnukl
Post Reply