FX Dreamline Classic Synthetic .25 cal
Posted: Tue Oct 19, 2021 9:25 am
It’s been a long (ish) wait but it’s finally here.
FX Dreamline classic synthetic in .25 cal.
Having owned some high end European air rifles and centrefires, the FX is certainly right up there in build quality, fit and finish.
The stock while silky smooth as you run your hand over it, is actually really grippy when in your hands to shoot.
Still waiting for some rings for a normal scope (Bushnell Elite 6500 2.5-16x44) however am stoked that the RICO RL42 thermal scope fits perfectly (maybe a tad high for cheek weld but I can live with that).
I need to find a thin 11 mm spanner as well to be able to loosen the front air gauge and bleed it out to fit the power plenum. Only 2.5 mm thinner than my thinnest spanner but it was too much.![Image](http://emoji.tapatalk-cdn.com/emoji2357.png)
Have a heap of pellets and slugs to test out and also invested in a smaller CARM magazine (9 shots instead of factory 15) and a single shot loader. The 9 shot will be used when the thermal is on as the factory Mag is a few mm too tall (which I new before hand).
Can’t wait to get it out on some rabbits and foxes.
Video below is from the RICO’s first shoot last night on my .22 Hornet, the rabbit is about 40 yards.
https://youtu.be/PMWLmZxhFRQ
![Image](//uploads.tapatalk-cdn.com/20211018/0600158b1c3674ffbb19d290ef1ed868.jpg)
It’s gunna be epic.![Image](http://emoji.tapatalk-cdn.com/emoji1.png)
![Image](//uploads.tapatalk-cdn.com/20211018/091bc34d928d7c03395c9afca5bf0ee6.jpg)
![Image](//uploads.tapatalk-cdn.com/20211018/35d2be04a60ad5e0cafd0ff034912e3d.jpg)
![Image](//uploads.tapatalk-cdn.com/20211018/64029d1e83ad13261dcb7ceb6c9c0986.jpg)
![Image](//uploads.tapatalk-cdn.com/20211018/f2440699f04a7f2a0d2c59327bccfdf5.jpg)
Sent from my iPhone using Tapatalk
![Image](http://emoji.tapatalk-cdn.com/emoji1.png)
FX Dreamline classic synthetic in .25 cal.
Having owned some high end European air rifles and centrefires, the FX is certainly right up there in build quality, fit and finish.
The stock while silky smooth as you run your hand over it, is actually really grippy when in your hands to shoot.
Still waiting for some rings for a normal scope (Bushnell Elite 6500 2.5-16x44) however am stoked that the RICO RL42 thermal scope fits perfectly (maybe a tad high for cheek weld but I can live with that).
I need to find a thin 11 mm spanner as well to be able to loosen the front air gauge and bleed it out to fit the power plenum. Only 2.5 mm thinner than my thinnest spanner but it was too much.
![Image](http://emoji.tapatalk-cdn.com/emoji2357.png)
Have a heap of pellets and slugs to test out and also invested in a smaller CARM magazine (9 shots instead of factory 15) and a single shot loader. The 9 shot will be used when the thermal is on as the factory Mag is a few mm too tall (which I new before hand).
Can’t wait to get it out on some rabbits and foxes.
Video below is from the RICO’s first shoot last night on my .22 Hornet, the rabbit is about 40 yards.
https://youtu.be/PMWLmZxhFRQ
![Image](http://uploads.tapatalk-cdn.com/20211018/0600158b1c3674ffbb19d290ef1ed868.jpg)
It’s gunna be epic.
![Image](http://emoji.tapatalk-cdn.com/emoji1.png)
![Image](http://uploads.tapatalk-cdn.com/20211018/091bc34d928d7c03395c9afca5bf0ee6.jpg)
![Image](http://uploads.tapatalk-cdn.com/20211018/35d2be04a60ad5e0cafd0ff034912e3d.jpg)
![Image](http://uploads.tapatalk-cdn.com/20211018/64029d1e83ad13261dcb7ceb6c9c0986.jpg)
![Image](http://uploads.tapatalk-cdn.com/20211018/f2440699f04a7f2a0d2c59327bccfdf5.jpg)
Sent from my iPhone using Tapatalk