AusVarmint

thanks to Yrrah's for his questions and info on pressure regs

I have been forced to re-consider my plans to adapt my filler to the small air tank.
Yrrah has told me it's illegal to have 232 bar yoke fittings on a tank rated to higher than 232 BAR pressures- needs to be DIN fittings

So can I get a DIN (300BAR) yoke to suit this filler or do I have to get a whole new filler unit with DIN fittings??



Please let me know Lewis what is possible?

Also what a pump is worth and how big are they??

thanks
later
p

Patrick,
I'll just swap it to a DIN for you.No problem.
The pumps are $395 posted and are the size of a large stirrup trye pump.
Lewis

ok cool
can you send me the specs of the thread sizes of these units so I can tell the guy at the dive shop so we can start the conversion.

Also any pics of the DIN fitting etc- all to help the conversion

Thanks
later
P

Patrick,

Just a hint.

I fill from low pressure (100BAR or less) with the SCUBA tank, and then top up with the pump.

Filling from zero pressure to 200BAR with the pump is very aerobic!

Chris