Page 1 of 2

Beeman stuff

Posted: Fri Apr 01, 2011 5:56 am
by Lewis Reinhold
June 30 is coming up again and I still have some odds and sods to move out.
Pellets,scopes,mounts,springs,seals,tunekits are still available and I do need to move them on with sharper pricing.
Just let me know.

Re: Beeman stuff

Posted: Fri Apr 01, 2011 2:27 pm
by fenring
No FWB 124 / 127 safety slides around, by any chance? Mine got a tad bent some time back and I'd like to get it back to 100% perfect if I could.

Thanks Lewis.

Re: Beeman stuff

Posted: Fri Apr 01, 2011 3:16 pm
by Lewis Reinhold
fenring wrote:No FWB 124 / 127 safety slides around, by any chance? Mine got a tad bent some time back and I'd like to get it back to 100% perfect if I could.

Thanks Lewis.
Nobody has them ,Scott.I tried to get some made but it is quite a job and nobody wanted it.

If I come across one,it's yours.

Re: Beeman stuff

Posted: Fri Apr 01, 2011 4:07 pm
by fenring
Thanks Lewis. It works just fine but it's not 100% right like the rest of the rifle is.

Re: Beeman stuff

Posted: Fri Apr 01, 2011 9:14 pm
by Lewis Reinhold
fenring wrote:Thanks Lewis. It works just fine but it's not 100% right like the rest of the rifle is.

Hopefully JM will make some one day.

Re: Beeman stuff

Posted: Sat Apr 02, 2011 10:25 pm
by curan
Hi Lewis,

You still got any .177 ramjets you want to sell at a "special end of run" price?

I've got 4 and a bit tins still in the safe, but could take some more at the right price!

Alternatively, any .177 JSB extra heavies would definitely be on the shopping list.

Let me know...........you know what the hornet likes :wink:

regards, curan

Re: Beeman stuff

Posted: Sun Apr 03, 2011 7:42 am
by Lewis Reinhold
curan wrote:Hi Lewis,

You still got any .177 ramjets you want to sell at a "special end of run" price?

I've got 4 and a bit tins still in the safe, but could take some more at the right price!

Alternatively, any .177 JSB extra heavies would definitely be on the shopping list.

Let me know...........you know what the hornet likes :wink:

regards, curan


Hi curan,
I have just 14 tins of Ramjet .177 left. Price $10 per tin posted.

Also have about 20 tins of Silver Bear .177 left at $10 per tin posted.

Here's one for the all the .20 cal fans out there.

Beeman Kodiak .20 13.32 gns RRP $10.50 per 200 NOW $5/tin posted!!!!!!!!!

These may be the cheapest .20's around and still one of the best.

Don't miss out if you have an R9/R10/R1/RX/RX1/RX2/HW97/Crow Magnum/Crusader/Taunus/Olympus/Rapid/Daystate and anything else I sold in .20 and of course the Sheridan.It was far away my best selling pellet for years! Now,it's sadly forgotten.
Kodiaks work well in all of them.

This is a great deal

Re: Beeman stuff

Posted: Sun Apr 03, 2011 9:22 am
by fenring
Those Kodiaks are a great pellet in the Sheridan - I shot 200 of them off over just a couple of days.

Re: Beeman stuff

Posted: Sun Apr 03, 2011 11:29 am
by Lewis Reinhold
fenring wrote:Those Kodiaks are a great pellet in the Sheridan - I shot 200 of them off over just a couple of days.

They are Scott but for some reason they've become almost 'saleproof' !
Kodiaks were always one of my standard testing pellet like Silver Bears.

Here's a great opportunity for anyone to stock up on lead!

Re: Beeman stuff

Posted: Sun Apr 03, 2011 1:34 pm
by gigitt
Lewis Reinhold wrote: Here's one for the all the .20 cal fans out there.

Beeman Kodiak .20 13.32 gns RRP $10.50 per 200 NOW $5/tin posted!!!!!!!!!

These may be the cheapest .20's around and still one of the best.

Gday Lewis,

How would these go in my Theoben TTR1 .20 ?
I'm still shooting the JSB Exact Diablo at 13.7gn

How many tins you got?

Cheers
Marko

Re: Beeman stuff

Posted: Sun Apr 03, 2011 1:37 pm
by Lewis Reinhold
gigitt wrote:
Lewis Reinhold wrote: Here's one for the all the .20 cal fans out there.

Beeman Kodiak .20 13.32 gns RRP $10.50 per 200 NOW $5/tin posted!!!!!!!!!

These may be the cheapest .20's around and still one of the best.

Gday Lewis,

How would these go in my Theoben TTR1 .20 ?
I'm still shooting the JSB Exact Diablo at 13.7gn

How many tins you got?

Cheers
Marko

Hi Marko,
Try them.I think the JSB's will perform better but these will be second closest.
I have about 100 tins.
Lewis

Re: Beeman stuff

Posted: Sun Apr 03, 2011 6:18 pm
by native hunter
HHMMM,Kodiaks.!!
I have used them before in my R1 and they were good but as you say JSb were just a weeny bit better.!!
I have a goodly supply of jsb but they would be good to have a few thousand for back up.
decisions ,decisions.
Native
Just checked, i have .20cal-
-4500 JSB and a few hundred in a pouch.
-500 H&N FTT.
-150 predator.
-400 beeman Kodiak heavies.

Re: Beeman stuff

Posted: Sun Apr 03, 2011 6:37 pm
by Lewis Reinhold
native hunter wrote:HHMMM,Kodiaks.!!
I have used them before in my R1 and they were good but as you say JSb were just a weeny bit better.!!
I have a goodly supply of jsb but they would be good to have a few thousand for back up.
decisions ,decisions.
Native

Hi Damien.No doubt the JSB's are a little better in the recent HW's.In the early days,JSB's would have needed a hammer to load in the tight HW barrels!Kodiaks were the go in R1's and R10's and the RX/RX1's in the early days.
Now,they're larger to accommodate the JSB's.

Re: Beeman stuff

Posted: Sun Apr 03, 2011 10:18 pm
by Detritus
G'day Lewis,
If its not too much trouble could you PM me a list of everything you have left...

If your looking for moving things out quickly & knowing my weakness for hording parts & spares,
even for things I dont own yet, I cant see it not being worth your time and effort :wink:

Thanks,
Ben.

Ps. And with you having just left the industry, I seem to have blundered into it! Sure is different on the other side of the counter! :o

Re: Beeman stuff

Posted: Mon Apr 04, 2011 5:31 am
by Lewis Reinhold
Detritus wrote:G'day Lewis,
If its not too much trouble could you PM me a list of everything you have left...

If your looking for moving things out quickly & knowing my weakness for hording parts & spares,
even for things I dont own yet, I cant see it not being worth your time and effort :wink:

Thanks,
Ben.

Ps. And with you having just left the industry, I seem to have blundered into it! Sure is different on the other side of the counter! :o


Hi Ben,
What are you after? Pellets,scopes,mounts,parts?

Are you a dealer now?

Lewis