Tikka .223 Magazine Help

Talk about your Varmint Rifles and other firearms here!
Post Reply
mick204
New Member
Posts: 43
Joined: Sun Apr 20, 2008 2:21 pm
Favourite Cartridge: 204
Location: Penrith NSW

Tikka .223 Magazine Help

Post by mick204 »

I am currently loading some pills for a .223 and have run out of room in the magazine!! is there an option to have the magazine converted in to a longer unit??
And who would i get to do this?

Thanks Mick
User avatar
andrewk
7mm Rem Mag
Posts: 1164
Joined: Tue Dec 16, 2008 8:34 pm
Favourite Cartridge: 222rem
Location: Adelaide

Re: Tikka .223 Magazine Help

Post by andrewk »

mick, i was thinking the same thing lastnight about my t3 in 204. that's the only thing that i've found a problem with the t3's but not such an issue to me since i get the groups i want when seating them to fit the mags.

i was pondering on either dremeling out the back of the mag and glueing/screwing in a block that allows more room for more oal of the cartridge or taking a mould of the mag and making my own out of fibreglass. second idea seems too much work.
tikka223

Re: Tikka .223 Magazine Help

Post by tikka223 »

if you change your short action bolt stop to a medium action one it would allow you to use a medium magazine instead of you current short action one. i was going to do this to my tikka lite stainless but when i went to pick it up from the lgs they had ordered a 1 -12 twist not wanting to wait another 6 weeks i kept it. my rifle wont stabilize anything over 60 grains so i have no need to do this anymore. gives me another reason to get my 7mm wsm :D
cheers
tikka
cam_mackps2
.222 Remington
Posts: 364
Joined: Tue Aug 08, 2006 3:55 pm
Location: Mansfield

Re: Tikka .223 Magazine Help

Post by cam_mackps2 »

The medium magazines are for the 22-250 to 338fed. Would the 204R to 223rem fit with the magazine lips? or slip out?
tikka223

Re: Tikka .223 Magazine Help

Post by tikka223 »

i know that you can change from medium to large my plan was that if it didnt i would built it up with devcon. the .22- 250 base diameter is only 2.3 mm larger than the the .223 (wikipedia). if it was to big of a gap i was going to try to take the short mag apart dremel the stopper at the back to the same size as the medium one and use the medium spring and follower.
cheers
tikka
User avatar
andrewk
7mm Rem Mag
Posts: 1164
Joined: Tue Dec 16, 2008 8:34 pm
Favourite Cartridge: 222rem
Location: Adelaide

Re: Tikka .223 Magazine Help

Post by andrewk »

cam_mackps2 wrote:The medium magazines are for the 22-250 to 338fed. Would the 204R to 223rem fit with the magazine lips? or slip out?
i don't think the medium sized mag will hold a 223 or 204. my 22-250 mag out of my tikka m55 won't take a 223. lips too loose :lol:

mick204, seat your bullets to where you want them and single feed your rifle. if it's range work no problem and if hunting... well hit your game first shot. :wink:
Post Reply