Page 1 of 1
If You had
Posted: Fri Dec 20, 2019 4:15 pm
by MISSED
This many 6x47L cases and a set of Redding Competition dies what would you do?
Sent from my iPhone using Tapatalk
Re: If You had
Posted: Fri Dec 20, 2019 4:25 pm
by macca
Well.......
The obvious answer would be make something else
So what action?
Cheers
Re: If You had
Posted: Fri Dec 20, 2019 4:37 pm
by MISSED
Do you think maybe long dasher ?
591
Re: If You had
Posted: Fri Dec 20, 2019 5:12 pm
by macca
The long dasher would be quite interesting.
87gr v max 3400fps or so they say.
Cheers
Re: If You had
Posted: Fri Dec 20, 2019 6:07 pm
by mistit
ive owned a long dasher missed , matt sunk a dasher reamer in basically to fireform 6x47 lap cases out to the long dasher , we did it on 2 actions , had whidden make the full length die off fire formed cases , some things work others dont , i found it picky to tune ,once i had the load it was a good thing , 60 grain bullets at 3850 with pressure though , but not worth the effort im of the opinion , varmint accurate buy not 6 dasher accurate
Re: If You had
Posted: Fri Dec 20, 2019 6:20 pm
by trevort
Is a 6x47lap too obvious?
I made a. 22x47 Lap simply because I love my 6/250
Sent from my iPhone using Tapatalk
Re: If You had
Posted: Fri Dec 20, 2019 6:49 pm
by Ol 55
I agree with Trev on this one
22x47 lap I have a couple of blue boxes of cases just for it. One day.
Gary
Re: If You had
Posted: Fri Dec 20, 2019 7:35 pm
by MISSED
Well it is going to be a .............drum Roll please a 6x47Lapua
A 30 inch Bartlein 1-9" tube in pretty much a straight taper is waiting to be fitted.
I put a couple of hours into stripping old finish and started the oiling process this afternoon after work.
Scope is undecided but it will be mounted in Burris Signature rings with the 20 MOA inserts.
Re: If You had
Posted: Fri Dec 20, 2019 7:50 pm
by MISSED
Re: If You had
Posted: Sat Dec 21, 2019 5:44 am
by macca
With that long a tube it will nip across those hills of yours with a bit of pace. what pills do you expect to try with the 1:9 ?
cheers
Re: If You had
Posted: Sat Dec 21, 2019 9:30 am
by MISSED
Going to see how it balances Macca it may end up at 26".
75 grn Vmax,67 grn Copprheads for paddock work and 103-107 grainers for fun at the range.
Re: If You had
Posted: Sat Dec 21, 2019 1:04 pm
by mistit
MISSED wrote: ↑Sat Dec 21, 2019 9:30 am
Going to see how it balances Macca it may end up at 26".
75 grn Vmax,67 grn Copprheads for paddock work and 103-107 grainers for fun at the range.
the balance was my first thought to andrew i had a mate years ago with a 30 inch 308 barrel on a sako varminter and was out of balance and looked a little silly , 26 a much better option
