New Project For the Droughtogether
Posted: Wed Aug 21, 2019 8:01 pm
I recently bought a Sako 85 XS Varmint in 22free Blued Walnut of course.
Now there are a lot of people know my opinion on the 22free so before I get Tarred and feathered I will not see the rifle and handle the rifle until the work is done
I bought the rifle with a specific cartridge in mind.
A 22/204 or 22 Terminator my plan is to shoot the 53 grain Vmax at 3700 FPS or even a 40 grain Zmax at 4000 fps
It will be throated for the 53's at max magazine length to hopefully get max case capacity.
A Redding type "S" die was accuired some time ago as well as a Redding 223 Competition seater that will see the reamer treatment.
I just need to find a 204 Body die
Picked up a 100 Norma cases that have been expanded, trimmed, chamfered (using a Sinclair expander Mandrel that will give 2 thou neck tension) and the primer pockets have been cleaned up.I will be annealing them after the first firing.
Flmath has asked me to do a thread on stock finishing so I figure I will use this stock and give pics and explanations as I go.
Now there are a lot of people know my opinion on the 22free so before I get Tarred and feathered I will not see the rifle and handle the rifle until the work is done
I bought the rifle with a specific cartridge in mind.
A 22/204 or 22 Terminator my plan is to shoot the 53 grain Vmax at 3700 FPS or even a 40 grain Zmax at 4000 fps
It will be throated for the 53's at max magazine length to hopefully get max case capacity.
A Redding type "S" die was accuired some time ago as well as a Redding 223 Competition seater that will see the reamer treatment.
I just need to find a 204 Body die
Picked up a 100 Norma cases that have been expanded, trimmed, chamfered (using a Sinclair expander Mandrel that will give 2 thou neck tension) and the primer pockets have been cleaned up.I will be annealing them after the first firing.
Flmath has asked me to do a thread on stock finishing so I figure I will use this stock and give pics and explanations as I go.