Page 1 of 1
Ruger Precision Rimfire
Posted: Mon Dec 31, 2018 7:27 am
by Seddo
Re: Ruger Precision Rimfire
Posted: Mon Dec 31, 2018 7:29 am
by Seddo
Here are the groups with the factory barrel. As you can see there is a big improvement but then there should he, the barrel costs more than the rifle.
Sent from my SM-G965F using Tapatalk
Re: Ruger Precision Rimfire
Posted: Mon Dec 31, 2018 7:50 am
by Branxhunter
That new barrel certainly seems to shoot very well there Seddo. I'm interested to know why you chose to put a custom barrel on the Ruger? Because you could?
Marcus
Re: Ruger Precision Rimfire
Posted: Mon Dec 31, 2018 8:52 am
by fenring
TBH from what I've seen Ruger have shot themselves in the foot calling it the "Precision" rimfire because it never seems to shoot all that great.
Should have just called it the "Tactical" or something.
Re: Ruger Precision Rimfire
Posted: Mon Dec 31, 2018 9:18 am
by Seddo
Branxhunter wrote: ↑Mon Dec 31, 2018 7:50 am
That new barrel certainly seems to shoot very well there Seddo. I'm interested to know why you chose to put a custom barrel on the Ruger? Because you could?
Marcus
I've always wanted to try a drop in lilja, I picked up a cheap cz455 but sold it before I got a barrel for it. When I was talking to lilja they said they were working on a barrel for the RPR so I ordered on then and placed an order for one and ordered a rifle. The positives for the RPR is it came with a 30moa rail and it accepts 10/22 mags and I have a lot of then.
You need around 55moa from 50m to 300y and 110moa to get to 500y, that is where a 30moa base helps.
Re: Ruger Precision Rimfire
Posted: Mon Dec 31, 2018 9:21 am
by Seddo
fenring wrote: ↑Mon Dec 31, 2018 8:52 am
TBH from what I've seen Ruger have shot themselves in the foot calling it the "Precision" rimfire because it never seems to shoot all that great.
Should have just called it the "Tactical" or something.
There was nothing precision about mine. The barrel nut was so tight and the threads were galled up, we needed to run a grinder into the nut to relieve the tension and then we have to press out the barrel. The condition of the threads was pretty average.
Re: Ruger Precision Rimfire
Posted: Sat Jan 12, 2019 7:55 pm
by lee_enfield223