Yep two stage. The local gunsmith worked on it and the pull is lighter but still has a bit of mushy creep at the start of the second stage.
My mate sourced some Lynx bases and 26mm rings to Mount the Pecar. It's an old reticle moving job so the Lynx bases with the adjustment were preferred to avoid having the reticle up in one corner of the view.
After the mounted it up they were zeroing it in, and groups started ok but got steadily worse. Turns out the bases were slipping on the dovetail. They ended up needing to take 13 thou' off the side of the bases to get them to tighten up securely. Some of the 13 thou' was removed from the face where the D&T hole for the claw screw goes into the base:
The angle of the claws fits the ~60 deg angle of the Krico dovetail well. Apparently the bases were to suit an Anschutz dovetail which is ~80 deg, and didn't fit an Annie 1400 well at all.
All mounted up:
At 65m it loves the Hornady 30gn v-maxes, but is ambivalent on the Rem 40gn PSPs.
So far it seems to prefer 30gn loads over 40gn loads - it also shoots the CCI 30gn HP loads very well.
Marcus