AusVarmint

Posted: **Mon Aug 03, 2009 8:31 pm**

Hi Jeff and Tony I have seen you mention this 7mm set up a few times and I'm a little interested.The Black Pig is getting close to rebarrel time and I happen to have a Krieger 9.5 twist 7mm barrel(thanks Tony).
What dies will I need to get this working?
How importent is the leade in getting the barrel life?
Any other points you think I should know about?
thanks fellas,
Macca

Posted: **Mon Aug 03, 2009 9:38 pm**

Hey Macca

If you didn't have the barrel I would say forget the 7mil and go the 30 cal on the same brass which I could give you the specs on

Posted: **Mon Aug 03, 2009 10:02 pm**

Albow, I just happen to have a 30 cal barrel as well mate.
cheers,
Macca

Posted: **Tue Aug 04, 2009 9:30 am**

Macca, PM sent..JR

AusVarmint

7mm on the 9.3x62

7mm on the 9.3x62

Re: 7mm on the 9.3x62

Re: 7mm on the 9.3x62

Re: 7mm on the 9.3x62