AusVarmint

Posted: **Fri Dec 29, 2006 2:07 pm**

Looking for a bi-pod ( not a harris style) but the wide legged ones for F-class shooting

one to fit a front hand rail not a stud

contact details please

thanks
later
P

Posted: **Fri Dec 29, 2006 2:28 pm**

Sinclairs has one..... a little more expensive than a Harris.. well lots!

http://www.sinclairintl.com/cgi-bin/cat ... type=store

Cheers
AI

Posted: **Fri Dec 29, 2006 9:31 pm**

G'Day ogre,
get onto the VRA shop in bendigo as they sell Aussie made ones as used in F class.
see link
http://www.vra.asn.au/shop/scopes.shtml
Two types available; sutherland for $145- or davies for $165-

Cheerio Ned

Posted: **Sat Dec 30, 2006 9:35 pm**

SARA store also has em...ph to see if in stock. And do a report for us if you get one...

Posted: **Sat Dec 30, 2006 10:50 pm**

Ned Kelly wrote:G'Day ogre,
get onto the VRA shop in bendigo as they sell Aussie made ones as used in F class.
see link
http://www.vra.asn.au/shop/scopes.shtml
Two types available; sutherland for $145- or davies for $165-

Cheerio Ned

ouch $$ wise-- any S/H ones around??
or could I borrow one so I can try out F class and see if I like it and want to spend the $$

thanks

later
p

Posted: **Sun Dec 31, 2006 6:00 am**

G'Day Ogre
sorry mate, I only use a front rest. I reckon your better off getting a good rest such as the sinclair one and bolting a 3" plywood block onto your forend.
Cheerio Ned

Posted: **Fri Feb 02, 2007 9:47 pm**

Ned,

The mods I did to the Bald Eagle worked very well at Weribee. Was stable and went low enough without removing the mariner wheel!

Dazza

Posted: **Sat Feb 03, 2007 12:32 pm**

Hi ogre,

I have a bipod sold by James Corbett at triple J Imports.
From memory they cost around $200. Here is a pic of my triple J bipod.

Posted: **Sat Feb 03, 2007 3:37 pm**

yep thats the sort of thing I'm looking for.
I have emailled JJJ import and am awaiting a reply.

I was really hoping to find one that people used to used but now with the rule change have moved on to using a rest and they would be willing to sell me their old bi-pod.
Thats the hope anyway.

mitchellchandler_au-- where are you? if you are in Melb can I come and take some measurements and detail pics so I can try and build my own if no one has one for sale.

Any one in Melb here who has one like this where i can take measurements from??

later
P

Posted: **Sat Feb 03, 2007 7:45 pm**

What are you on about? If you really are a F/class shooter,You would see various types at any NRAA Shoots where F/class competitions are conducted. If you are interested,try the OzFclass site.Personally I feel,the rests I have seen,are good value.
Flash.

Posted: **Sat Feb 03, 2007 8:36 pm**

looks like a holden jack, weld a base plate on for stability and away you go #10 max.

Regards Alpal

Posted: **Sun Feb 04, 2007 10:27 am**

Hi Ogre,

I live in the middle of NSW, but if you want I can do up some drawings for you, i may not be a draftsmen but I welder can do some decent drawings

Iam thinking of making a bipod from stainless steel but the weight might be the problem

I might be at glenrowan for the 2 day shoot in april

Posted: **Sun Feb 04, 2007 1:16 pm**

mitchellchandler_au wrote:Hi Ogre,

I live in the middle of NSW, but if you want I can do up some drawings for you, i may not be a draftsmen but I welder can do some decent drawings Iam thinking of making a bipod from stainless steel but the weight might be the problem

I might be at glenrowan for the 2 day shoot in april

Shit yeah- thanks mate--
will pm you my email addy
S/S will be pushing your weight limits to the max if you want to comp with F-class as it 2kg AFIK in the new rule book.

Thanks

later
p

AusVarmint

where can I get a bipod for F-class

where can I get a bipod for F-class

F/class rest