ProCal 500m Fly shoot and Canberra Rifle Club 1000yd match
-
- .338 Lapua Magnum
- Posts: 2055
- Joined: Thu Jul 27, 2006 11:09 pm
- Favourite Cartridge: 25.06
- Location: Hervey Bay Qld
ProCal 500m Fly shoot and Canberra Rifle Club 1000yd match
Well guys its all on again.
Friday Sept 21
Practice for 500 Fly Majura Range Canberra
Sat Sept 22
ProCal 500 Fly shoot Majura Range Canberra
Sun Sept 23
1000 yd Benchrest match Canberra Rifle Club
Now who's going .... if you dont want to shoot at least come for a look and then maybe shoot next time.
trevort tried it at Leeton and had a ball ... the only thing holding you back is you ...
Worst case is a day at the range ... not all bad eh.
cheers
Rinso
Friday Sept 21
Practice for 500 Fly Majura Range Canberra
Sat Sept 22
ProCal 500 Fly shoot Majura Range Canberra
Sun Sept 23
1000 yd Benchrest match Canberra Rifle Club
Now who's going .... if you dont want to shoot at least come for a look and then maybe shoot next time.
trevort tried it at Leeton and had a ball ... the only thing holding you back is you ...
Worst case is a day at the range ... not all bad eh.
cheers
Rinso
-
- .204 Ruger
- Posts: 454
- Joined: Fri Mar 09, 2007 8:47 am
- Favourite Cartridge: 105mm
- Location: Canberra
Definitely be there.
Just in regard to the 1K on Sunday. There will be calls a couple of times during the Fly shoot on Saturday for people to pre-register for the 1k on Sunday. Please just put your name on the clipboard that will be left out.
We get a heap of people for it after every fly shoot, so have to arrange bench draws etc on the Saturday night so we aren't dicking around for half of Sunday morning trying to get everything sorted. People have been turned away before because they didn't sign up and we had too many other shooters to start re-shuffling everything 10 minutes before we were due to start shooting. Do yourself a favor, save yourself the disappointment by registering to shoot on the saturday.
Thanks.
Just in regard to the 1K on Sunday. There will be calls a couple of times during the Fly shoot on Saturday for people to pre-register for the 1k on Sunday. Please just put your name on the clipboard that will be left out.
We get a heap of people for it after every fly shoot, so have to arrange bench draws etc on the Saturday night so we aren't dicking around for half of Sunday morning trying to get everything sorted. People have been turned away before because they didn't sign up and we had too many other shooters to start re-shuffling everything 10 minutes before we were due to start shooting. Do yourself a favor, save yourself the disappointment by registering to shoot on the saturday.
Thanks.
- Ackley Improved
- 6mm Dasher
- Posts: 1898
- Joined: Wed Aug 09, 2006 12:24 pm
- Location: Albury
-
- .204 Ruger
- Posts: 454
- Joined: Fri Mar 09, 2007 8:47 am
- Favourite Cartridge: 105mm
- Location: Canberra
Looks like the 6.5AI is becoming popular. Thats what I've been shooting for a while now. Know 2 other people who have gone to it in the last couple of months.Ackley Improved wrote:I will be there...
Will try the 1000yd on Sunday if the Swede Improved is ready to go..
I suppose I could run the POPGUN at 1000yd if all else fails! How many rounds do I need for 1000yds?
Some of you buggers better turn up!!!!!
Cheers
AI
As for ammo, depends what class you decide to shoot. If you are just shooting LG, you need 5 rounds for each of the 2 record targets, plus ammo for your 6 min sighting in period. I bring about 30 rounds for light gun, and havent ever gone through them all. Heavy is 10 for each record target.
-
- 17Rem
- Posts: 1123
- Joined: Mon Jan 29, 2007 8:49 pm
- Favourite Cartridge: 17Rem, 22.250AI, 308
- Location: townsville qld
-
- .338 Lapua Magnum
- Posts: 2055
- Joined: Thu Jul 27, 2006 11:09 pm
- Favourite Cartridge: 25.06
- Location: Hervey Bay Qld
Mick,
You can book me in for the 1000yd in LG and I will decide on HG on the Saturday but will prbably be in both.
AI,
You can shoot the pop gun mate just feed them bullets some pasta so they dont run outa energy half way ...
steven,
I will be more than happy to run second to you mate .. I think a few others might get a say though.
I dont see any FORUM memebrs syaing "I can have a go at this yet" .. whats the problem guys.
cheers
Rinso
You can book me in for the 1000yd in LG and I will decide on HG on the Saturday but will prbably be in both.
AI,
You can shoot the pop gun mate just feed them bullets some pasta so they dont run outa energy half way ...
steven,
I will be more than happy to run second to you mate .. I think a few others might get a say though.
I dont see any FORUM memebrs syaing "I can have a go at this yet" .. whats the problem guys.
cheers
Rinso
-
- 300 Win Mag
- Posts: 1781
- Joined: Wed Sep 13, 2006 4:35 pm
- Favourite Cartridge: 6.5x55 or 6BR
- Location: Melbourne Vic
if Terv's going and I can scam a lift- maybe
but who knows I might be under the knife by then for the liver operation so cannot commit to anything more solid than the coffee thats brewing as I type.
Anyway a 6BR 1:10 twist sporter 8lb sporter with a 10X scope would be well out paced by all the mega $$ rigs there.
later
p
but who knows I might be under the knife by then for the liver operation so cannot commit to anything more solid than the coffee thats brewing as I type.
Anyway a 6BR 1:10 twist sporter 8lb sporter with a 10X scope would be well out paced by all the mega $$ rigs there.
later
p
- Dr G
- 300 Win Mag
- Posts: 1841
- Joined: Mon Oct 30, 2006 3:52 pm
- Favourite Cartridge: 204 Ruger
- Location: Not in Roxby Downs, SA
We recently secured a big swag of cash from the feds so their may well be a few work trips to Canberra for meetings, breifings and other bullshit. in the next couple of years
now if i could time one of these trips to coincide with say a fly shoot or something...
Its this sort of scheming that may see me out of a job if i am not careful
now if i could time one of these trips to coincide with say a fly shoot or something...
Its this sort of scheming that may see me out of a job if i am not careful
- Ackley Improved
- 6mm Dasher
- Posts: 1898
- Joined: Wed Aug 09, 2006 12:24 pm
- Location: Albury
Sign me up for the 1000yds Mick!
Well I didnt know that the 6.5X55AI was getting popular!! What chambering did you use? I have a Tooley FL bushing die and the reamer to suit!
Steven.... by what name does this "KILLER" go by???
As for pasta Rinso.... the Dasher will need a real full belly of it and some pre-training!! Never shot at 1000yds, so I better have a go at sighting in for it too I guess! Time for the Ballsitics software!
Come on guys... this will be a good weekend to come watch! Fly Saturday and 1000yds on Sunday! Plus you get to meet a few of us!
Cheers
AI
Well I didnt know that the 6.5X55AI was getting popular!! What chambering did you use? I have a Tooley FL bushing die and the reamer to suit!
Steven.... by what name does this "KILLER" go by???
As for pasta Rinso.... the Dasher will need a real full belly of it and some pre-training!! Never shot at 1000yds, so I better have a go at sighting in for it too I guess! Time for the Ballsitics software!
Come on guys... this will be a good weekend to come watch! Fly Saturday and 1000yds on Sunday! Plus you get to meet a few of us!
Cheers
AI
-
- 300 Win Mag
- Posts: 1781
- Joined: Wed Sep 13, 2006 4:35 pm
- Favourite Cartridge: 6.5x55 or 6BR
- Location: Melbourne Vic
well I'm not sure this is correct
on this page I put in mount waverly Vic to Canberra ACT and clicked shortest to give me a rough idea on how long it would take to drive.
This thing gives me 12+ hours- is that right
I remember driving to Sydney in about 10 so why the difference for shorter distance??
I also put in Mt waverly Albury and then hitch a ride with ACKIMP.
This drive map says 5:20 hours
Where if I plan the route by intercity rail it says 3.5 hours
How can there be such a time difference??
In actual time taken by those that have driven it recently- how long Melb to Canberra??
Melb to Albury??
THanks
later
p
on this page I put in mount waverly Vic to Canberra ACT and clicked shortest to give me a rough idea on how long it would take to drive.
This thing gives me 12+ hours- is that right
I remember driving to Sydney in about 10 so why the difference for shorter distance??
I also put in Mt waverly Albury and then hitch a ride with ACKIMP.
This drive map says 5:20 hours
Where if I plan the route by intercity rail it says 3.5 hours
How can there be such a time difference??
In actual time taken by those that have driven it recently- how long Melb to Canberra??
Melb to Albury??
THanks
later
p
- Ackley Improved
- 6mm Dasher
- Posts: 1898
- Joined: Wed Aug 09, 2006 12:24 pm
- Location: Albury
Albury to Melb outskirts 2:30. 3 hours will have you well into Melbourne from Albury. Canberra is another 3 to 3.5 hours. So, 5.5 to 6 hours should see you there! I cant remember exact times even though I have driven it heaps!
I would love to give you a lift from Albury, but the single cab rodeo is full on the way to a comp. Must look at getting a new car asap!
Cheers
AI
I would love to give you a lift from Albury, but the single cab rodeo is full on the way to a comp. Must look at getting a new car asap!
Cheers
AI