AusVarmint

Hi
Where does N165 come in the burn rate, is it close to 2213 or up around 2217.
I have 2kg of it and want to use it in my 280AI, will it be ok, there's no load data published for 280, but last weekend used 58.5gr behind 168 and 180 pressure seemed ok, does that load sound to hot ???
Thanks
Matt P

Matt ,N165 is of the 4831 area ,it's single base ..I tested some years ago in my 6/6.5x55imp ,worked good but was at that time real expensive and the ADI stuff worked just as good ..I use VV560 in my Redneck with the 187s ,it has an edge on all the rest tested ..JR..Jeff Rogers..

Matt P wrote:Hi
Where does N165 come in the burn rate, is it close to 2213 or up around 2217.
I have 2kg of it and want to use it in my 280AI, will it be ok, there's no load data published for 280, but last weekend used 58.5gr behind 168 and 180 pressure seemed ok, does that load sound to hot ???
Thanks
Matt P

Hey guys you can check burn rates here-
http://www.reloadersnest.com/burnrates.asp

of course rates vary depending on who publishes the info but this is a good GUIDE

Cheers