AusVarmint

mick_762 wrote:G'day Brent,
I dont have any of the projectiles that your chasing, so how much for the 6.5mm 123gn scenars and the 6mm 90gn?

Mick

Hi Mick I hate having all these drips and drabs
they are silver jackets Mick if that's OK ,buggered if I know 23.00 + post does that sound good ???

Hi all Have some excess projectiles that I am not using 57--6.5 123gr SJ scenars lapua SOLD 48--6.5 108gr SJ scenars lapua 80--6.0 105gr scenars lapua 279--6.0 95gr sst hornady 15--6.0 67gr HPFB copper heads 20--6.0 67gr HPFB ISP's 21--6.0 90gr SJ scenars lapua SOLD total 442 pills Mixed bunch but i...

Thanks mate just spotted that adamjp

Hi And yes I would agree with Ned Kelly But anything over 123GR in the x47 case they usually go to 2209 powder it seems to perform better than the 2208 with the heavier pills Have had some of the excellent groups at 200m with the lap 108GR SJ scenars with 37gr 2208 but at 500m-600m at the range was ...

Con if you new all this already
just disregard my raving mate!

Con only ever measure mine from the ogive on the pill with the comparator gauge Too much variance in the tips from manufacturing. Okay, what length are you using for that? Reason I ask is that QL is showing many of the internet popular loads to be a tad hot ... for example I have a new 6.5x47Lapua ...

Con only ever measure mine from the ogive on the pill with the comparator gauge
Too much variance in the tips from manufacturing.

Well mate if you are happy with the neck tension and the seating depth is not changing under a compressed load or transport and you are getting good groups hand loading is really up to your likes and dislikes and what does or doesn't work mate. I personally like the light neck tensions less working ...

Hi mate I run 123 GR Lapua silver jacket with 39.5 gr 2208 up its clacker Federal primer 20-25jump and .288 neck on lapua brass had some nice groups with this load and the same groups at 38.3GR 2208 barrel is 1:8 maddco.Did go all the way to 41GR 2208 in load development but the groups did not impro...

To All

Thanks for all the help, PM's and contacts and I think things will be found now
messages have been sent and it looking good

Cheers to All Brent

Con wrote:What cartridge ... might be able to save you money unless you must have RCBS.
Cheers...
Con

Hi Con

244 REM AI Dies
6.5 257ROBERTS AI Dies
7x57 AI Dies

All x57 mauser based cases
need FS / ST /NK bushing For all
except for the 244REM do not need NK Die

Cheers Brent

Hi All

Have finally found the dies that I have been looking for
and RCBS make them in G series dies
But does any one know of the best place to order them
here in Aust.
Cheers Brent

Hi fellas and fillies Just got the XLR in rem short Please be very careful of the threads They are very rough and it is hard to mesh them square easy to cross thread and the thread metal is very soft SUGGEST Taking mine to the engineering joint today to clean them up before too much damage and assem...

Hi does anybody know anything about lazer sight and or how they are adjusted
need it to be accurate at 100 meters with a fine dot ????
Any help would be great

Cheers Brent