AusVarmint

Instead of two pans with the Skip annealer, I just used a ring in the pan and another roller to feed the .223.Without the ring and the bigger roller the .243 to 30.06 cases runs http://i799.photobucket.com/albums/yy272/Gerhardt_Louw/Herlaai/20160825_133200.jpg http://i799.photobucket.com/albums/yy27...

Hi Mick & Con

Here is some information on QL

http://www.the-long-family.com/optimal% ... 20time.htm

Is a bit of a read,but i think it is worthwhile.Once you understand the program and how to calibrate it,it works really well.

Hope you enjoy it.

Daisy
If a copper bore brush doesn't pull it out,try a round file, Slide it into the chamber until it touch the casing give it a twist, till it stuck and pull it out. Use a small file that will get stuck in the neck to limit the chance to damage the chamber

Hi Guys

Look at this


http://www.youtube.com/watch?v=OnJilZEzIHM

http://www.steinertsensingsystems.com/t ... m-lakeland

http://www.steinertsensingsystems.com/l ... -kronograf

Hi Stinkitup Is it new or reloaded ammo,If it was new ammo,I would open one of them, through the shot out, pull the wad and dump the powder. If the powder is dry and looks normal I would then put the primed case in my gun and fire it.If it works I would use the rest Well this is what I would have do...

Hi Jason

Thanks it looks good especially with just one error reading

Gerhardt

Do you guys have any further updates on the Magnospeed

a) How does it setup
b) can you download the info to a computer
c) does it give you SD and Es values
d) How many strings and how many shots in a string
e) FALSE readings is it better than the CED 2

Gerhardt

Heavy gun
I have came across the .375 Allen X press ,a .338 Lapua case necked up to .375 Much cheaper bras than the .375 Snipe Tac ,.375 CheyTac or .375 Viersco Magnum

Light gun
.284Win or 7mm Tombi or 6.5x57 Ai

Hi Sean

Thanks again i will stick with the 7mm-08. I am going to order it tomorrow from QGE in Brisbane and do my PTA Then the wait

Thank you for all the help Sean/ Wadcutter / a.JR / and 220
your help is appreciated

Hi Sean

Thanks for your help i will most likely go with the 7mm-08. I just want to look at the .270 short magnum. But looking at the powder ratio. It looks like the .270 is going to be a throat burner and how is accuracy compared to the 7mm

Thanks

Hi

Thanks for the help so far. Think we will go with the 7mm-08. I have a 8.5-25x50 Leupy for the range and think i would look at a3.5-10x40 or 50 both on qd base's for the hunting side. What is the longest range the 7mm-08 would do acuratly.

Hi
Which callibre would be best between a 7mm-08 remington and 7x64 Brenneke Primery use target up to 500 yard Secondary use, hunting deer in australia Rifle will be for a woman so looking for less recoil Will be reloading for the riffle Looking at a Sako85 with a Leupold VXIII 6.5 or 8.5-20x50